LP560-4: Bumper & Intake 2

Little progress on the bumper and intake.

Last week did one side, and today, use some plastic board to do the other side. Found the intake should be slanted enough to be realistic, but there are some placeholders for the chassis which cannot be easily removed nor relocate. Tried to sand it as slant as possible...

Hopefully I can start puttying the front skirt this week and the intake and take some time chop off the center part of the bumper and replace it with some PE grille. After that the side intake can be prepared...

LP560-4: Bumper & Intake 1

Refer to the picture grabbed from the Internet, the front bumper is much different between the 2009 version of LP560-4 and the original one came in with the kit.

Without further ado, mixed some Tamiya AB Putty, and make the new front-bumper.

After the putty cured and sanded, the shape is pretty much there, the detailing work will be continued when the new grille and the air intake area to be rebuilt.

LP560-4: Planning

Found an old kit on the shelf: Fujimi's Lamboghini Gallardo. Why not do a quick one....

Looked up some reference info from the Net. 2009 Lamborghini Gallardo LP560-4. Not much to be modified, but it is quite a challenge as I'm going to paint it in White which I've never tried before...

Project put on hold...

due to health issue, a lot of works had been doing was put on hold, including the blog update....

finally, i'm back to the bench and the computer to have some updates.

The previous seats and ISF projects are put aside as waiting for some materials to be delivered.